Open your router configuration, set the LAN port of the router to 192.168.80.1, the general router defaults to 192.168.1.1 or 192.168.0.1, which is 192.168.80.1. In the network cable access router. Modified the router may have a internet disconnection. Wait for a while to restart the computer or find a local connection. Select the Internet protocol point attribute. After opening the window settings Set in real -time effect, open the browser, enter the IP address on your mining fan, the default is 192.168.80.140, and then press Enter. Enter the default user account of the mining machine Admin, the password is also admin by default, and then click Login to log in. After logging in to the mining machine, the mines are set to the mines to enter the miner configuration page. After the configuration, you can mine, click the settings, and then take effect after the mining pool; you can observe whether the mining machine works normally. Click the network management button to enter the network management information configuration page. If there are more than two wing -bits, please modify the IP as other addresses. After modification, please click the setting button. Click the device information ----- The device status, you can see the frequency, computing power, and temperature of the device. Among them, the page shows the system configuration (intuitive response mining pool task has no response, computing power warning, temperature warning cable, device shutdown, equipment shutdown Temperature limits, frequency point settings, etc.). Whether the IP network segment of the miner and the computer is the same network If you can't find the ip ip, please download the management software on the official website for IP to find
Open your router configuration, set the LAN port of the router to 192.168.80.1, the general router defaults to 192.168.1.1 or 192.168.0.1, which is 192.168.80.1. In the network cable access router. Modified the router may have a internet disconnection. Wait for a while to restart the computer or find a local connection. Select the Internet protocol point attribute. After opening the window settings Set in real -time effect, open the browser, enter the IP address on your mining fan, the default is 192.168.80.140, and then press Enter. Enter the default user account of the mining machine Admin, the password is also admin by default, and then click Login to log in. After logging in to the mining machine, the mines are set to the mines to enter the miner configuration page. After the configuration, you can mine, click the settings, and then take effect after the mining pool; you can observe whether the mining machine works normally. Click the network management button to enter the network management information configuration page. If there are more than two wing -bits, please modify the IP as other addresses. After modification, please click the setting button. Click the device information ----- The device status, you can see the frequency, computing power, and temperature of the device. Among them, the page shows the system configuration (intuitive response mining pool task has no response, computing power warning, temperature warning cable, device shutdown, equipment shutdown Temperature limits, frequency point settings, etc.).
Whether the IP network segment of the miner and the computer is the same network
If you can't find the ip ip, please download the management software on the official website for IP to find